DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
430
IPv6
After clicking the IPv6 radio button and the Next button, the following window will appear.
Figure 8-6 ACL Configuration Wizard (Create, Packet Type, IPv6) Window
The fields that can be configured are described below:
Parameter Description
Sequence No.
Enter the ACL rule number here. This value must be between 1 and 65535.
Select Auto Assign to automatically generate an ACL rule number for this entry.
Protocol Type
Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, Protocol ID, ESP (50), PCP (108), SCTP (132), and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Mask - After selecting the Protocol ID option, manually enter the protocol
mask value here. The range is from 0x0 to 0xFF.
• Fragments - Select this option to include packet fragment filtering.
The fields that can be configured in Assign rule criteria are described below:
To Next Page
Loading...
