D-Link DGS-3630 SERIES - Login Method

To Next Page

To Previous Page

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

This window is used to display and configure the login method for each management interface that is supported by the

Switch.

To view the following window, click Management > Login Method, as shown below:

Figure 4-6 Login Method Window

The fields that can be configured in Enable Password are described below:

Parameter Description

Level

Select the privilege level for the user here. The range is from 1 to 15.

Password Type

Select the password type for the user here. Options to choose from are:

• Plain Text - Specifies that the password will be in plain text. This is the

default option.

• Encrypted - Specifies that the password will be encrypted based on SHA-1.

• Encrypted-MD5 - Specifies that the password will be encrypted based on

MD5.

Password

Enter the password for the user account here. In the plain-text form, the password

can be up to 32 characters long, is case-sensitive, and can contain spaces. In the

encrypted form, the password must be 35 bytes long and is case-sensitive. In the

encrypted MD5 form, the password must be 31 bytes long and is case-sensitive.

Click the Apply button to accept the changes made.

Click the Edit button to re-configure the specified entry.

The fields that can be configured in Login Method are described below:

Parameter Description

After clicking the Edit button, this parameter can be configured. Select the login

method for the specified application here. Options to choose from are No Login,

• No Login requires no login authentication to access the specified

application.

• Login will require the user to at least enter a password when trying to

access the application specified.

Other manuals for D-Link DGS-3630 SERIES