DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
257
DHCP Server Exclude Address Settings
The DHCP server assumes that all IP addresses in a DHCP pool subnet are available for assigning to DHCP clients.
You must use this page to specify the IP address that the DHCP server should not assign to clients. This command
can be used multiple times in order to define multiple groups of excluded addresses.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Exclude Address
Settings, as shown below:
Figure 9- 8 DHCP Server Exclude Address Settings window
The fields that can be configured are described below:
Parameter Description
Begin Address
Enter the starting IP Address.
End Address
Enter the ending IP Address.
Click Apply to implement changes made.
DHCP Server Pool Settings
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Pool Settings, as shown
below:
Figure 9- 9 DHCP Server Pool Settings window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the DHCP Server Pool name.
Click Add to create the new DHCP pool. By clicking the Edit button, the user can edit the DHCP Server Pool Settings.
To Next Page
Loading...
