1 Power LED
• Solid: The device is receiving electrical power.
• Blinking: The device is powering up or in power saving
mode. The light will also blink during the Simple
Connect process.
• O: The device is not receiving electrical power.
2 PowerLine LED
• Solid: The device is connected to a Powerline
network.
• O: The device has not found any other compatible
Powerline devices using the same encryption key.
The color indicates the Powerline link rate:
• Green: The Powerline link rate is best.
• Amber: The Powerline link rate is better.
• Red: The Powerline link rate is good.
3 Ethernet LED
• Solid: The Ethernet port is linked.
• O: There is no Ethernet connection.
4
Simple Connect Button/
Reset Button
Press and hold the button for two seconds to secure
your network or hold the button for 10 seconds to reset
to the factory default settings.
5 Gigabit Ethernet Port
Connect to a 10/100/1000 Ethernet device such as a
router, computer, gaming console, network storage
unit, or a media player.
1
3
4
5
2
Product Overview
3
To Next Page
Loading...
