D-Link DI-524 - Resetting the DI-524 to Factory Default Settings

60
8. Resetting the DI-524 to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
choose to Reset the DI-524 to the factory default settings. Remember that D-Link
AirPlus G products network together, out of the box, at the factory default
settings.
To hard-reset the DI-524 to Factory Default Settings, please do the following:
Troubleshooting




After the DI-524 reboots (this may take a few minutes),
it will be reset to the factory Default settings.
Use a paper clip to press the Reset button.
Hold for about 10 seconds and then release.
Locate the Reset button on the back of the DI-524.
Reset