40D-Link DIR-636L User Manual
Section 3 - Conguration
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-636L. If Invisible is selected, the
SSID of the DIR-636L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-636L in
order to connect to it.
Refer to the next page for more information regarding wireless security.
Channel Width:
Visibility Status:
Wireless Security:
To Next Page
Loading...
