DIR-853 Quick Installation Guide
In order to connect your device to the network of a 3G or LTE operator, on the
Device mode page, from the Connection method list, select the
Autonomous value. Then from the Work mode list, select the Mobile
Internet value. In this mode you can configure a 3G/LTE WAN connection,
set your own settings for the wireless network in the 2.4GHz and 5GHz bands,
and set your own password for access to the web-based interface of the device.
In order to connect your device to a wireless ISP (WISP), on the Device
mode page, from the Connection method list, select the Autonomous
value. Then from the Work mode list, select the WISP Repeater value. In
this mode you can connect your device to another access point, configure a
WAN connection, set your own settings for the wireless network in the
2.4GHz and 5GHz bands, and set your own password for access to the web-
based interface of the device.
25
To Next Page
Loading...
