57D-Link DIR-X1860 User Manual
Section 3 - Configuration
Wireless - Advanced Settings...
Security Mode Choose None or WPA/WPA2-Personal (recommended).
DFS Channel DFS enables you to use more channels to help find one with
the
least interference. However, please note that when using
DFS, the router must scan for radar signals for a minute before
using a channel, and will change channels automatically if
radar signals are detected.
Transmission Power Select the desired wireless transmission power.
Channel Width A higher channel width allows for faster data transmission, at
the possible expense of wireless coverage and compatibility
with older wireless clients. Select the optimum channel width
for your wireless network from the drop-down menu.
Schedule Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable, or you can create your own schedules in the Schedules
section. Refer to Time & Schedule - Schedule on page 83
for more information.
To Next Page
Loading...
