5
The DP-300U offers extraordinary flexibility, operating with all major network
operating systems and protocols:
! TCP/IP
UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX)
Windows NT/2000, Windows 95/98SE/ME, Windows XP
NetWare 5.x NDPS LPR Remote Printing
! NetBEUI
Windows NT/2000/XP, Windows 95/98SE/ME, Windows for Workgroups,
Microsoft LAN Manager, IBM LAN Server
! AppleTalk
MacOS EtherTalk
Windows-based setup and administration software, PS Admin, is supplied with
the Print Server, making configuration and management quick and easy. The
Print Server also supports configuration and management via the Telnet protocol
for networks without Windows-compatible machines.
External Features
Port Connectors
The DP-300U’s three printer ports are located on its rear panel. One USB and two
identical parallel ports are labeled USB, LPT1 and LPT2. These printer ports are
independently configurable using the PS Admin program or the print server’s Telnet
interface. (See the PS Admin User’s Guide, available on the CD that came with the
DP-300U, for information about configuring the print server’s ports.) The Print
Server also supports web configuration permitting users to configure settings
through the web browser. Default IP Address as follows:
! Default IP Address – 192.168.0.10
! Subnet Mask – 255.255.255.0
Note:
The PC’s IP Address must be in the same subnet as the Print Server’s IP Address for the
two devices to communicate. (For example, if your Print Server’s IP Address is
192.168.0.10, with a subnet mask of 255.255.255.0, then your computer’s IP Address
should be 192.168.0.x, where x is a value between 1-254, excluding 10.)
To Next Page
Loading...
