D-Link DSL-4320L Setup Guide

2
Modem Setup Guide – NBN FTTP
6. Log in with your D-Link modem username and password if you are prompted to log in.
By default, these are:
Username: admin
Password: admin
7. Select Internet and Advanced Settings.
8. Select Residential Gateway from the WAN Access Type drop-down.
9. Select the nominated port for Ether WAN Port.
10. Select Username/Password Connection (PPPoE) as Internet Connection.
11. Enter your TPG username and password.
12. Click Save.
Once you receive notification that your TPG NBN service is active, your D-Link DSL-4320L
should now be online. If you are still having issues, please call us on 1300 997 271 for
further assistance.

D-Link DSL-4320L Specifications

Device Interfaces

USB Port Power	5 V / 0.9 A
802.11 ac/n/g/b/a wireless LAN	5 V / 0.9 A

Operating Environment

Operating Temperature	0 to 40 °C (32 to 104 °F)
Operating Humidity	10% to 95% maximum (non-condensing)

Power

Input Voltage	100 to 240 V AC, 50/60 Hz
Output Voltage	12 V DC
Output Current	5 A

Weight and Dimensions

weight	925.08 g (2.04 lbs)
dimension 1	225.20 mm (8.87 inches)
dimension 2	342.70 mm (13.49 inches)
dimension 3	100.88 mm (3.97 inches)