Unified Services Router User Manual
176
wan traffic counters are restared
Deleting schedule based firewall rules.
Traffic limit has been reached
Deleting schedule based firewall rules
from DB.
Traffic meter monthly limit has been
changed to %d.
Update schedule based firewall rules in
DB.
Enabling traffic meter for only dowload.
Restart schedule based firewall rules.
Enabling traffic meter for both directions.
inter vlan routing enabled
Enabling traffic meter with no limit.
inter vlan routing disabled
Email alert in traffic meter disabled.
Disabling Content Filter for %d
Email alert in traffic meter enabled.
Enabling Content Filter for %d
Traffic Meter:Monthly limit %d MB has
been "
./src/firewall/linux/user/firewalld.c:59:#u
ndef ADP_DEBUG2
Traffic Metering: Adding rule to drop all
traffic
./src/firewall/linux/user/firewalld.c:61:#d
efine ADP_DEBUG2 printf
Traffic Metering: %sabling Email traffic
Enabling Source MAC Filtering
Disabling attack checks for IPv6 rules.
Disabling Source MAC Filtering
Enabling attack checks for IPv6 rules.
Adding MAC Filter Policy for Block &
Permit Rest
Configuring one to one NAT settings with
%s private start IP "
Adding MAC Filter Policy for Permit &
Block Rest
Deleting forward one to one NAT having
setting %s private start"
Restarting Source MAC Address Policy
Disabling attack check for Block ping to
WAN interface.
Disabling Firewall Rule for DHCP Relay
Protocol
Disabling attack check for Stealth mode
for tcp
Enabling Firewall Rule for DHCP Relay
Protocol
Disabling attack check for Stealth mode
for udp
prerouting Firewall Rule add for Relay
failed
Disabling attack check for TCP Flood.
prerouting Firewall Rule add for Relay
failed
Disabling attack check for UDP Flood.
Deleting MAC Filter Policy for Address
%s
Disabling attack check for IPsec.
Adding MAC Filter Policy for Address
%s
Disabling attack check for PPTP.
Disabling Firewall Rules for DMZ host
Disabling attack check for L2TP.
Enabling Firewall Rules for DMZ host
Disabling attack check for UDP Flood.
Disabling Firewall Rules for Spill Over
Load Balancing
Disabling attack check for IPsec.
Disabling Firewall Rules for Load
Balancing
Disabling attack check for PPTP.
Enabling Firewall Rules for Load
Balancing
Disabling attack check for L2TP.
Enabling Firewall Rules for Spill Over
Load Balancing
Enabling attack check for Block ping to
WAN "
Enabling Firewall Rules for Auto
Failover
Enabling attack check for Stealth Mode
for tcp.
Enabling Firewall Rules for Load
Balancing .
Enabling attack check for Stealth Mode
for udp.
Enabling Firewall Rules for Spill Over
Load Balancing .
Enabling attack check for TCP Flood.
Enabling Firewall Rules for Auto
Failover
Enabling attack check for UDP Flood.
Deleting BlockSites Keyword \
Enabling attack check for IPsec.
Enabling BlockSites Keyword \
Enabling attack check for PPTP.
Disabling BlockSites Keyword \
To Next Page
Loading...
