D-Link DUB-H7 Quick Install Guide

ENGLISH
Quick Install Guide
7-Port USB 2.0 Hub
Thank you for purchasing the DUB-H7 7-Port USB 2.0 Hub. Follow the easy steps
in this guide to properly set up your Hub. Please verify that all the package
contents are available. If any of the items are missing, please contact your
reseller.
DUB-H7
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website.
United States
Internet: http://support.dlink.com
Canada
Internet: http://support.dlink.ca
Copyright ©2020 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum transfer rate based on USB 2.0 specications. Actual data
throughput will vary. The total power consumption of the connected USB devices must be less than 2.4A. Product specications, size
and shape are subject to change without notice, and actual product appearance may dier from that depicted on the packaging. Visit
dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.00(NA)_94x128 | February 10, 2020 660-DL1-UH217A0B000
Package Contents
DUB-H7 USB 2.0 Hub
Power Adapter
USB 2.0 Cable
• Windows® 7, 8, 8.1, 10
• Mac OS® X 10.4 or Higher
System Requirements
Installation
2. Plug the square end (Type-B USB connector) of
the included USB cable into the upstream port
on the DUB-H7.
3. Plug the rectangular end of the included
USB cable into an available USB port on your
computer.
1. Plug the power adapter into an AC power
source and connect the other end to the power
connector on the DUB-H7.
4. Your computer will automatically detect
and install the drivers for the DUB-H7. Once
installed, you may plug in your USB devices.
Note: The DUB-H7 provides fast charging when
the power adapter is connected, allowing you to
quickly charge your iPad®, iPhone®, tablets, and
other mobile devices.
Product Overview
USB 2.0 Charging Ports
(BC 1.2 support)
Type-B Upstream Port
Power Connector

D-Link DUB-H7 Specifications

Interfaces

upstream USB 2.0 Type B port	1
downstream USB 2.0 Type A ports	7
fast charging ports	2

Power

power input voltage	5 V
power input current	3 A
supplied charging current (standard mode)	0.5 A per port
supplied charging current (fast-charge mode - standard ports)	0.5 A per port
supplied charging current (fast-charge mode - fast charging ports)	1.2 A per port

Operating Environment

operating temperature	32 to 104 °F
storage temperature	-4 to 158 °F
operating humidity	5% to 95% (non-condensing)
storage humidity	0% to 95% (non-condensing)

Weight and Dimensions

dimensions	3.94 x 2.2 x 0.9 inches
weight	0.19 lbs