DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Password
A user password for this line.
PIN code to dial
Fill in the field to allow the user of the phone to make calls only
after dialing the PIN code.
Enable Display name
Move the switch to the right to enable transfer of the caller’s name
for outgoing calls.
Display name The name of the caller which will be displayed to the called party.
Advanced
Call waiting
Move the switch to the right to accept incoming calls when the line
is busy. To switch between calls, press the FLASH key on the
phone.
Anonymous call
blocking
Move the switch to the right to reject calls when the calling party
conceals its number.
Anonymous calling
Move the switch to the right to conceal your number from the called
party.
DND
DND
Do Not Disturb. Move the switch to the right to reject all incoming
calls (the busy tone will be heard).
DND on schedule
Move the switch to the right to reject all incoming calls at a certain
time of day. If the switch is moved to the right, the Time period
field is available. Specify the needed period as HH:MM-HH:MM,
where HH:MM is time in 24-hour format.
Session Control
Enable session control
Move the switch to the right to enable session control. Upon that you
will be able to manage voice sessions during a call with the help of
the FLASH key on your phone. (The function should be supported
by your ISP).
Transfer code Feature code for transferring a call to another phone.
Page 269 of 352
To Next Page
Loading...
