D-Link DWA-510 - Connect to a Wireless Networkwindows XP; Using Windows Xp

27D-Link DWA-510 User Manual
Section 3 - Configuration
Windows
®
XP/ Vista users may use the built-in wireless utility. The following instructions are for Windows XP Service Pack 2 users.
If you are using Windows
®
2000,youmustusetheD-Linkutility.Pleaserefertopage18.
Right-click on the wireless computer icon in your system tray
(lower-rightcornernexttothetime).SelectView Available Wireless
Networks.
If you receive the Wireless Networks Detectedbubble,clickonthe
center of the bubble to access the utility.
The utility will display any available wireless networks in your area. Click
on a network and click the Connect button.
Refer to the Wireless Security section for information on connecting
to a secure network.
If you want to use the D-Link utility instead of the Windows
®
XP wireless
utility,refertothenextpage.
Connect to a Wireless Network
Using Windows
®
XP