D-Link DWL-650 - Using the Configuration Utility

If the utility icon does not appear, double-
click the shortcut icon that has appeared
on your desktop.
Using the Configuration Utility
A. Status: Displays the
MAC Address of the
Access Point that
is associated with the
DWL-650.
B. SSID
:
The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default.
C. TxRate:
The default
setting is 11 Mbps; however,
TxRate settings are auto-
matically determined by the
DWL-650 depending on the
distance from the access point.
B
A
D
C
E
F
D. Channel: Displays
the channel information.
By default, the channel is
set to 6 and selection is
automatically determined
by the DWL-650.
E. Link Quality / Signal Strength:
Displays the Link Quality for the DWL-
650 wireless connection to the access
point. The Signal Strength represents the
wireless signal between the access point
and the DWL-650. The percentage
coincides with the graphical bar.
F. Data Rate:
Graphically
displays the
statistics of data
transmitted and
received.
The D-Link Air Configuration Utility window will appear. By
default, it will take you to the Link Info section.
APPENDIX