D-Link DWL-6600AP Specifications

Unied N Concurrent Dual-band PoE Access Point
DWL-6600AP
Product Highlights
The DWL-6600AP Unied N Dual-band PoE Access Point is a best-in-class indoor access
point designed specically for business-class environments. With high data transmission
speeds and access point load balancing, the DWL-6600AP oers high-quality and reliable
wireless service. Versatile and powerful, the DWL-6600AP can be exibly deployed as a
standalone wireless access point or as a managed access point controlled by a D-Link®
Unied Wireless Switch or Wireless Controller. Businesses can start with standalone mode
deployment, then migrate to a centrally managed system anytime later.
Enhanced Performance
The DWL-6600AP delivers reliable wireless performance with maximum wireless signal
rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia™
(WMM) Quality of Service features makes the DWL-6600AP an ideal access point for audio,
video, and voice application. In addition, the load balancing feature ensures maximum
performance and best service quality in the wireless environment
3
.
Conguration Replicating Clusters
For small businesses that need to deploy multiple access points (APs) but lack the resources
to tackle the complicated task of network management, the DWL-6600AP’s clustering
feature oers the ideal solution. When a small number of DWL-6600APs is deployed on the
network, they may be congured to form a cluster. Once the administrator is through with
conguring one access point, the same conguration can then be applied to all remaining
APs that are members of that cluster. Up to 16 APs may be used to form a cluster.
Features
Ideal for Business
• Blazing wireless performance of up to 300 Mbps
1
network throughput
• Conguration Replicating Clusters reduce conguration
complexity
• Up to 32 virtual access points may be created from a
single device
2
• Automatic load-balancing among neighboring access points
• Flexible QoS with WMM
Trusted Security
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
• WEP Encryption
• 802.1X User authentication
• MAC address ltering
• Rogue AP detection
Convenient Installation
3
• Can be easily mounted on a wall or ceiling
• 802.3af Power Over Ethernet enables installation in
installation in hard-to-reach locations
• Mounting brackets are included
Enterprise Class Concurrent Dual Band Wireless Radio
Supports 2x2 MIMO 2.4/5Ghz 802.11a/b/g/n with
throughput speeds up to 300Mbps.
Flexible Housing Design
Embedded antennas with external antenna option
and plenum rated housing for non-intrusive and safe
deployment in any indoor application.
Wireless Management Support
Works with DWC-1000 Wireless Controller and
DWS-3160/4026 Unied Wireless Switch for larger AP
installations that require centralized conguration
and management.

D-Link DWL-6600AP Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	450 Mbit/s
Power consumption (typical)	9.6 W
Internal	No
Placement	Ceiling, Wall
Certification	FCC Class B, CE Class B, C-Tick
Product color	Gray
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2

Weight and Dimensions

Depth	77.5 mm
Width	156 mm
Height	- mm
Weight	500 g