D-Link DWL-8600AP - Page 5

DWL-8600AP Install Guide 5
Topowertheaccesspoint,youcanuseoneofthefollowingmethods:
1.Usethesuppliedpoweradapter
2.ConnectoneendofyourEthernetcableintotheLAN(PoE)portonthe
DWL-8600APandtheotherendintooneportonaPoEswitch.
To setup and manage the DWL-8600AP from a computer, use one of the
followingmethods:
1. Connect a straight through Ethernet cable between the access point
andyourcomputer.
2. Connecttheaccesspointtoaswitchorrouteranduseacomputerfrom
acomputerthatisalsoconnectedtothatswitchorrouter.