EasyManua.ls Logo

D-Link DWL-G122 - Disabling Conflicting Adapters

D-Link DWL-G122
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Getting Started
With its default settings, the DWL-G122 will connect with other
D-Link AirPlus G products, right out of the box.
A wireless router - D-Link AirPlus
TM
G
DI-524
A laptop computer with a D-Link AirPlus G DWL-G122
A desktop computer with a D-Link AirPlus G DWL-G122
A cable modem - D-Link DCM-201
There are basically two modes of networking:
Infrastructure – using an access point or router, such as the DI-624.
Ad-Hoc – directly connecting to another computer, for Peer-to-Peer
communication, using wireless network adapters on each computer, such
as two or more DWL-G122 Wireless Network USB adapters.
On the following pages we will show you an example of an Infrastructure
Network and an Ad-Hoc Network.
An Infrastructure network contains an access point or router. The
Infrastructure network example shown on the following page contains the
following D-Link network devices (your existing network may be comprised of
other devices):
TM
TM
TM

Other manuals for D-Link DWL-G122

Related product manuals