D-Link DWR-920 - Page 41

37D-Link DWR-920 User Manual
Section 3 - Conguration
Wi-Fi WPS
PBC
Use PIN Mode
PIN
Push Button Conguration (PBC) enables you to easily
connect your devices to the DWR-920 by pushing a PBC
button on both devices. Press your device’s PBC button
and then click Start Via PBC, to begin the WPS process.
Move the toggle to enable PIN protection for use with
the WPS feature.
Note: WPS PIN Mode is disabled by default. This mode is
less secure and is not recommended. It is retained in this
product for compatibility purposes only.
The PIN is a unique number that can be used to
congure your router. Click Generate New to generate
a new random PIN, or select Use Default to restore
the factory PIN. Note that if the WPS PIN feature is
enabled, using a new PIN is strongly recommended.
Click Apply to save changes.