DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
338
After clicking the Hardware Type hyperlink or the Radio Detail tab under the AP Hardware Capability tab, the
following page will appear:
Figure 2-6 AP Hardware Capability - Radio Detail window
Use the drop-down menu to select the hardware type and click the radio buttons to select the radio index.
The fields that can be displayed are described below:
Parameter Description
Radio Count
Display the number of radios supported on the hardware platform, which is either 1
Radio Type Description
Display the type of radio, which might contain information such as the manufacturer
name and supported IEEE 802.11 modes.
Display the number of VAPs the radio supports.
Display whether support for IEEE 802.11a mode is enabled.
Display whether support for IEEE 802.11bg mode is enabled.
Display whether support for IEEE 802.11n mode is enabled.
After clicking the Image Table tab under the AP Hardware Capability tab, the following page will appear:
To Next Page
Loading...
