DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
355
Ethernet Packets Received
Total packets received by the AP on the wired network.
Total bytes received by the AP on the wired network.
Ethernet Packets
Total packets transmitted by the AP on the wired network.
Ethernet Bytes Transmitted
Total bytes transmitted by the AP on the wired network.
Multicast Packets Received
Total multicast packets received by the AP on the wired network.
Total receive errors detected by the AP on the wired network.
Total transmit errors detected by the AP on the wired network.
ARP Reqs Converted from
Number of ARP requests that the AP converted from a broadcast packet to a
unicast packet before sending to the wireless link.
Filtered ARP Reqs
Number of ARP requests that AP was able to drop instead of sending on the
Broadcasted ARP Requests
The number of ARP requests sent as broadcasts on the VAPs. This counter
does not include WDS links. The same ARP frame may be counted multiple
times when it is broadcasted on multiple VAPs. The counter is available even
when ARP suppression is disabled.
After clicking the Radio tab under the Statistics tab, the following page will appear:
Figure 2-24 Managed AP Statistics – Radio window
Use the drop down menu to select AP’s MAC address and click the radio button to select a radio to view the
detailed information about the packets and bytes transmitted and received on the radio (wireless) interface of a
particular access point managed by the Switch.
The fields that can be displayed are described below:
Parameter Description
Total packets received by the AP on this radio interface.
Total bytes received by the AP on this radio interface.
Total packets transmitted by the AP on this radio interface.
Total bytes transmitted by the AP on this radio interface.
To Next Page
Loading...
