D-Link DWS-3160-24TC - Page 414

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
409
Figure 3-18 Advanced Settings – Debug window
The fields that can be configured are described below:
Parameter Description
Password
Enter the admin password for the AP.
Confirm Password
Retype the password to confirm.
Enable Debug
Click to enable or disable debugging.
Click the <<Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
After clicking the Channel or Power hyperlink, the following page will appear:
Figure 3-19 Advanced Settings – Channel/Power window
The fields that can be configured are described below:
Parameter Description
Channel
Use the drop-down menu to define the portion of the radio spectrum that the radio uses
for transmitting and receiving.
Power
Enter a number in percentage to set the power level which affects how far an AP
broadcasts its RF signal.
Click the <<Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
AP Provisioning
This window is used to configure access point provisioning.
To view this window, click Administration > AP Management > AP Provisioning as shown below: