DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
423
equal to the RTS Threshold.
Long Retries
Display the maximum number of transmission attempts on frame sizes greater than
Transmit Lifetime
Display the number of milliseconds to wait before terminating attempts to transmit
the MSDU after the initial transmission.
Receive Lifetime
(msecs)
Display the number of milliseconds to wait before terminating attempts to
reassemble the MMPDU or MSDU after the initial reception of a fragmented
Station Isolation
Tick the check box to allow the AP blocking communication between wireless
Primary Channel Use the drop-down menu to set the Primary Channel as the Upper or Lower 20-
MHz channel in the 40-MHz band. This option only available when the Channel
is configured as
.
Short Guard Interval
Select to enable or disable the short guard interval when operating in 802.11n
Multicast Tx Rate
Select the 802.11 rate at which the radio transmits multicast frames.
Supported Channels
Display the channels supported for the radio mode. The available channels vary
based on the selected Country Code in the Basic Setup Global window.
Auto Eligible
Tick the check boxes beneath each channel to include the channel in the automatic
channel assignment process.
Tick the check boxes to add MCS Index when operating in 802.11n mode.
Display the transmission rate sets.
Basic
Tick the check boxes to indicate the data rates that all stations associating with the
Supported
Tick the check boxes to indicate rates that the access point supports. The AP
automatically chooses the most efficient rate based on factors like error rates and
distance of client stations from the AP.
Click the Apply button to accept the changes made.
Click the Clear button to discard the changes made and return to the default settings.
After clicking the VAP tab under the Profile Name tab, the following page will appear:
To Next Page
Loading...
