DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
424
Figure 3-30 AP Profile Configuration – VAP window
The fields that can be configured are described below:
Parameter Description
Access Point Profile
Click to select the radio to configure the settings for before enabling the VAP.
Network
Tick the check box to enable the corresponding VAP on the selected radio. Use the
drop-down menu to select the network to assign to the VAP.
Click the Apply button to accept the changes made.
Click the Edit button to modify settings for the corresponding network.
After clicking the Edit button, the following page will appear:
Figure 3-31 AP Profile Configuration – VAP (Edit) window
The fields that can be configured or displayed are described below:
To Next Page
Loading...
