DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
441
IP DSCP – Select one of the DSCP keyword values from the IP DSCP drop-down
menu. When selecting Other, the IP DSCP Value field appears. Enter a value in
the field.
IP Precedence – Enter a value between 0 and 7 in the IP Precedence field.
IP ToS – Enter a value as a hexadecimal number from 00 to FF in the IP ToS Bits
Click the Create Rule button to add a new rule.
Click the Cancel button to discard the configuration.
When clicking the Add Rule button to add a rule for Named IP ACL, the following page appears:
Figure 4-6 IP Access Control Lists – Add Rule (Named IP ACL) window
The fields that can be configured are described below:
Parameter Description
Enter an ID for the rule.
Action
Use the drop-down menu to select the ACL forwarding action when a packet
matches the rule’s criteria.
Match Every Use the drop-down menu to select True or False. True means that all packets will
match the selected IP ACL and Rule, and will be either permitted or denied. When
True is selected, the option of configuring other match criteria will not be offered
since all packets match the rule. To configure specific match criteria for the rule,
select False to configure the other match criteria.
Protocol
Use the drop-down menu to select a packet’s IP protocol to match condition for the
selected IP ACL rule. When selecting Other, the Protocol Value field appears.
Enter a value in the field.
Source IP Address
Enter an IP address and a packet’s source IP address must match the address
Enter the source IP mask.
Source L4 Port
Use the drop-down menu to select L4 keyword of source ports to match a packet’s
TCP/UDP source port. When selecting Other, the Source Port Value field
appears. Enter a value in the field.
Destination IP Address
Enter an IP address and a packet’s destination IP address must match the address
Enter the destination IP mask.
Use the drop-down menu to select L4 keyword of destination ports to match a
To Next Page
Loading...
