D-Link DWS-3160-24TC - RPS Rack-Mountable Chassis, the DPS-900

DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
13
Figure 2- 9. Installing the DPS-800 in an Equipment Rack
NOTE: The DPS-800 is NOT equipped with any power supplies on its own. This is a 2-slot, rack-
mountable chassis.
RPS Rack-Mountable Chassis, the DPS-900
Because of the small size of the DPS-200, the DPS-900 can be used to house and mount the DPS-200 into a switch
rack. The DPS-900 is a standard-size rack mount (5U) designed to hold up to eight DPS-200 redundant power
supplies. Using this rack mount chassis, will allow the user to save space when deploying the DPS-200 RPS’s into a
switch rack.
Figure 2- 10. Inserting the DPS-200 into the DPS-900