DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
25
Areas of the User Interface
After a successful connection to the Web User Interface has been made, the following page should be displayed.
Figure 4- 12. Main Web Manager window
On this page we will find three main areas to observe.
Area Number Function
AREA 1
This area is divided up into two main sections. The LAN section can be used to configure anything
that is related to the Ethernet network segments. The WLAN section can be used to configure
anything that is related to the Wireless LAN segments. Both sections have Folder links that can be
expanded and both sections have Window links that will navigate the user to a specific feature’s
configuration page. This can be done by simply click on them with the mouse pointer.
AREA 2
This area displays a graphical, real-time image of the front panel of the Switch. When clicking on
active ports, in this image, the user will be navigated to the port activity page for the specific port.
Also in this area, on the bottom left, the user can access the Save and Tools pages by simply
clicking on them. On the top right, the user can also select the Refresh Interval time for this area.
Click Apply to accept the change made.
AREA 3
This area is where the magic really happens. After clicking on a Window link, in Area 1, this area
will display the configuration page for the specific features that can be configured or monitored.
To Next Page
Loading...
