D-Link DWS-3160-24TC - Chapter 10 Asymmetric VLAN Command List

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
130
Chapter 10 Asymmetric VLAN
Command List
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
10-1 enable asymmetric_vlan
Description
This command is used to enable the asymmetric VLAN function on the Switch.
Format
enable asymmetric_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable asymmetric VLANs:
DWS-3160-24PC:admin# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DWS-3160-24PC:admin#
10-2 disable asymmetric_vlan
Description
This command is used to disable the asymmetric VLAN function on the Switch.
Format
disable asymmetric_vlan