DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
131
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable asymmetric VLANs:
DWS-3160-24PC:admin# disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
10-3 show asymmetric_vlan
Description
This command is used to display the asymmetric VLAN state on the Switch.
Format
show asymmetric_vlan
Parameters
None.
Restrictions
None.
Example
To display the asymmetric VLAN state currently set on the Switch:
DWS-3160-24PC:admin#show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric VLAN : Enabled
DWS-3160-24PC:admin#
To Next Page
Loading...
