D-Link DWS-3160-24TC - Show Autoconfig

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
133
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable autoconfig:
DWS-3160-24PC:admin# disable autoconfig
Command: disable autoconfig
Success.
DWS-3160-24PC:admin#
11-3 show autoconfig
Description
This command is used to display if the auto-configuration is enabled or disabled.
Format
show autoconfig
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To display autoconfig status:
DWS-3160-24PC:admin#show autoconfig
Command: show autoconfig
Autoconfig State: Enabled
DWS-3160-24PC:admin#