DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
231
Format
show cfm mipccm
Parameters
None.
Restrictions
None.
Example
To display MIP CCM database entries:
DWS-3160-24PC:admin# show cfm mipccm
Command: show cfm mipccm
MA VID MAC Address Port
---------- ---- ----------------- -----
opma 1 01-02-03-04-05-06 2
opma 1 00-11-22-33-44-55 3
Total: 2
19-22 config cfm mp_ltr_all
Description
This command is used to enable or disable the "all MPs reply LTRs" function.
Format
config cfm mp_ltr_all [enable | disable]
Parameters
- Specifies that the MP's reply to the LTR function will be set to all.
enable - Specifies that this function will be enabled.
disable - Specifies that this function will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the "all MPs reply LTRs" function:
To Next Page
Loading...
