D-Link DWS-3160-24TC - Page 281

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
277
Example
To configure the state of the DHCP Option 82 for the DHCP relay function:
DWS-3160-24PC:admin# config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DWS-3160-24PC:admin#
24-8 enable dhcp_relay
Description
This command is use to enable the DHCP relay function on the Switch.
Format
enable dhcp_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP relay function.
DWS-3160-24PC:admin# enable dhcp_relay
Command: enable dhcp_relay
Success.
DWS-3160-24PC:admin#
24-9 disable dhcp_relay
Description
This command is use to disable the DHCP relay function on the Switch.
Format
disable dhcp_relay