D-Link DWS-3160-24TC - Page 354

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
350
DWS-3160-24PC:admin#show router_ports all
Command: show router_ports all
VLAN Name : default
Static Router Port : 1-10
Dynamic Router Port :
Router IP :
Forbidden Router Port : 20
VLAN Name : v2
Static Router Port :
Dynamic Router Port :
Router IP :
Forbidden Router Port :
VLAN Name : v3
Static Router Port :
Dynamic Router Port :
Router IP :
Forbidden Router Port :
VLAN Name : guestVLAN
Static Router Port :
Dynamic Router Port :
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
32-20 show igmp_snooping statistics counter
Description
This command is used to display the statistics counter for IGMP protocol packets that are received
by the Switch since IGMP snooping was enabled.
Format
show igmp_snooping statistic counter [vlan <vlan_name> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan - Specifies a VLAN to be displayed.
<vlan_name> - Enter the VLAN name here.
vlanid - Specifies a list of VLANs to be displayed.
<vlanid_list>
- Enter the VLAN ID list here.
ports - Specifies a list of ports to be displayed.
<portlist> - Enter the list of port to be displayed here.
Restrictions
None.