D-Link DWS-3160-24TC - Page 399

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
395
38-7 show lacp_port
Description
This command is used to display the current mode of LACP of the ports.
Format
show lacp_port <portlist>
Parameters
lacp_port - Specified a range of ports to be configured.
<portlist> - Enter the list of ports used for this configuration here.
If no parameter specified, the system will display current LACP and all port status.
Restrictions
None.
Example
To display port lacp mode:
DWS-3160-24PC:admin#show lacp_port
Command: show lacp_port
Port Activity
----- --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
11 Active
12 Active
13 Passive
14 Passive
15 Passive
16 Passive
17 Passive
18 Passive
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All