D-Link DWS-3160-24TC - Page 433

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
429
Example
To configure an unlimited number of maximum users for MAC-based Access Control on ports 1 to
8:
DWS-3160-24PC:admin# config mac_based_access_control ports 1-8 max_users
no_limit
Command: config mac_based_access_control ports 1-8 max_users no_limit
Success.
DWS-3160-24PC:admin#
To configure the MAC-based Access Control timer parameters to have an infinite aging time and a
block time of 120 seconds on ports 1 to 8:
DWS-3160-24PC:admin# config mac_based_access_control ports 1-8 aging_time
infinite block_time 120
Command: config mac_based_access_control ports 1-8 aging_time infinite
block_time 120
Success.
DWS-3160-24PC:admin#
42-7 create mac_based_access_control
Description
This command is used to assign a static 802.1Q VLAN as a MAC-based Access Control guest
VLAN.
Format
create mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-
4094>]
Parameters
guest_vlan
- Specifies MAC-based Access Control guest VLAN by name, it must be a static 1Q
VLAN.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
guest_vlanid - Specifies MAC-based Access Control guest VLAN by VID, it must be a static 1Q
VLAN.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a MAC-based Access Control guest VLAN: