D-Link DWS-3160-24TC - Page 442

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
438
42-18 config mac_based_access_control trap state
Description
This command is used to enable or disable sending of MAC-based Access Control traps.
Format
config mac_based_access_control trap state [enable | disable]
Parameters
enable - Enable trap for MAC-based Access Control. The trap of MAC-based Access Control will
be sent out.
disable - Disable trap for MAC-based Access Control.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable trap state of MAC-based Access Control:
DWS-3160-24PC:admin# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DWS-3160-24PC:admin#
42-19 config mac_based_access_control log state
Description
This command is used to enable or disable generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
enable - Enable log for MAC-based Access Control. The log of MAC-based Access Control will
be generated.
disable - Disable log for MAC-based Access Control.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.