D-Link DWS-3160-24TC - Page 47

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
43
Example
To delete the 802.1X user called ‘test’:
DWS-3160-24PC:admin# delete 802.1x user test
Command: delete 802.1x user test
Success.
DWS-3160-24PC:admin#
4-5 show 802.1x user
Description
This command is used to display the 802.1X user’s login information.
Format
show 802.1x user
Parameters
None.
Restrictions
None.
Example
To display the 802.1X user’s login information:
DWS-3160-24PC:admin# show 802.1x user
Command: show 802.1x user
Username Password
----------- ----------
user1 abcds
Total Entries : 1
DWS-3160-24PC:admin#
4-6 config 802.1x auth_protocol
Description
This command is used to configure the 802.1X authentication protocol.
Format
config 802.1x auth_protocol [local | radius_eap]