D-Link DWS-3160-24TC - Page 476

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
472
Parameters
<vlan_name 32> - Enter the multicast VLAN name here. The VLAN name can be up to 32
characters long.
add – Specifies to associate an MLD snooping profile to a multicast VLAN.
delete – Specifies to de-associate an MLD snooping profile from a multicast VLAN.
profile_name - Specifies the MLD snooping profile name.
<profile_name 1-32> - Enter the MLD snooping profile name here. The name can be up to 32
characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add an MLD snooping profile to a multicast VLAN group with the name “mv2”:
DWS-3160-24PC:admin#config mld_snooping multicast_vlan_group mv2 add
profile_name MGroup
Command: config mld_snooping multicast_vlan_group mv2 add profile_name MGroup
Success.
DWS-3160-24PC:admin#
46-8 show mld_snooping multicast_vlan_group
Description
This command is used to display an MLD snooping multicast VLAN group.
Format
show mld_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the multicast VLAN name here. This name can be up to 32
characters long.
If no parameter is specified, then all the MLD snooping multicast VLAN groups will be displayed.
Restrictions
None.
Example
To display all MLD snooping multicast VLAN groups configured on the Switch: