D-Link DWS-3160-24TC - Page 494

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
490
48-5 create stp instance_id
Description
This command is used to create an MST Instance without mapping the corresponding VLANs.
Format
create stp instance_id <value 1-15>
Parameters
instance_id - Specifies the MSTP instance ID. Instance 0 represents for default instance, CIST.
<value 1-15> - Enter the MSTP instance ID here. This value must be between 1 and 15.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create MSTP instance:
DWS-3160-24PC:admin#create stp instance_id 2
Command: create stp instance_id 2
Warning:There is no VLAN mapping to this instance_id!
Success.
DWS-3160-24PC:admin#
48-6 delete stp instance_id
Description
This command is used to delete an MST Instance.
Format
delete stp instance_id <value 1-15>
Parameters
instance_id - Specifies the MSTP instance ID. Instance 0 represents for default instance, CIST.
<value 1-15> - Enter the MSTP instance ID here. This value must be between 1 and 15.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.