D-Link DWS-3160-24TC - Show Nlb Fdb

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
501
Parameters
<vlan_name 32> - Specifies the VLAN of the NLB multicast FDB entry to be configured.
vlanid - Specifies the VLAN by the VLAN ID.
<vlanid> - Enter the VLAN ID here.
<macaddr>
- Specifies the MAC address of the NLB multicast FDB entry to be configured.
add - Specifies a list of forwarding ports to be added.
delete - Specifies a list of forwarding ports to be deleted.
<portlist> - Enter the list of ports used for this configuration.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure NLB multicast MAC forwarding database:
DWS-3160-24PC:admin# config nlb multicast_fdb default 03-bf-01-01-01-01 add 1-5
Command: config nlb multicast_fdb default 03-bf-01-01-01-01 add 1-5
Success.
DWS-3160-24PC:admin#
49-4 show nlb fdb
Description
This command is used to display the NLB configured entry table.
Format
show nlb fdb
Parameters
None.
Restrictions
None.
Example
To display the NLB forwarding table: