DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
623
DWS-3160-24PC:admin# disable snmp traps
Command: disable snmp traps
Success.
66-26 enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP authentication trap support:
DWS-3160-24PC:admin# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DWS-3160-24PC:admin#
66-27 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.
To Next Page
Loading...
