DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
624
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP authentication trap support:
DWS-3160-24PC:admin# disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
66-28 enable snmp linkchange_traps
Description
This command is used to configure the sending of link change traps.
Format
enable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the sending of link change traps:
DWS-3160-24PC:admin# enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DWS-3160-24PC:admin#
66-29 disable snmp linkchange_traps
Description
This command is used to configure the sending of link change traps.
Format
disable snmp linkchange_traps
To Next Page
Loading...
