DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
634
Restrictions
Only Administrators can issue this command.
Example
To reconnect to a member:
DWS-3160-24PC:admin# reconfig member_id 1
Command: reconfig member_id 1
DWS-3160-24PC:admin#
Login:
67-5 config sim_group
Description
This command is used to configure SIM group information.
Format
config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id 1-4>]
Parameters
add - Specifies to add a specific candidate to the group.
<candidate_id 1-100> - Enter the candidate ID to be added to the group here. This value
must be between 1 and 100.
<password> - (Optional) The password of candidate if necessary.
delete - Specifies to delete a member from the group.
<member_id 1-4> - Enter the member ID of the member to be removed from the group here.
This value must be between 1 and 4.
Restrictions
Only Administrators can issue this command.
Example
To add a member:
DWS-3160-24PC:admin# config sim_group add 2
Command: config sim_group add 2
Please wait for ACK !!!
SIM Configure Success !!!
Success.
DWS-3160-24PC:admin#
To delete a member:
To Next Page
Loading...
