D-Link DWS-3160-24TC - Page 660

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
656
70-2 show system_severity
Description
This command is used to display the severity level controls for the system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To display severity level control for system:
DWS-3160-24PC:admin#show system_severity
Command: show system_severity
System Severity Trap : information(6)
System Severity Log : information(6)
DWS-3160-24PC:admin#