D-Link DWS-3160-24TC - Delete Iproute; Show Iproute

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
684
DWS-3160-24PC:admin# create iproute default 10.1.1.254 primary
Command: create iproute default 10.1.1.254 primary
Success.
DWS-3160-24PC:admin#
78-2 delete iproute
Description
This command is used to delete an IP route entry from the Switch’s IP routing table.
Format
delete iproute [default | <network_address>] <ipaddr>
Parameters
default - Deletes an IP default route (0.0.0.0/0).
<network_address> – Specifies the network address used.
<ipaddr> - Specifies the next hop IP address of the route need to be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IP default route:
DWS-3160-24PC:admin# delete iproute default 10.1.1.254
Command: delete iproute default 10.1.1.254
Success.
DWS-3160-24PC:admin#
78-3 show iproute
Description
This command is used to display the Switch’s current IP routing table.
Format
show iproute {static}
Parameters
static – (Optional) Specifies that this route will be static.