D-Link DWS-3160-24TC - Show Vrrp

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
692
ipif - (Optional) Specifies the IP interface name used.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
If no parameter is specified, all the VRRP entries will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete VRRP:
DWS-3160-24PC:admin# delete vrrp vrid 3 ipif System
Command: delete vrrp vrid 3 ipif System
Success.
DWS-3160-24PC:admin#
79-7 show vrrp
Description
This command is used to display the VRRP settings.
Format
show vrrp {ipif <ipif_name 12> {vrid <vrid 1-255>}}
Parameters
ipif - (Optional) Specifies the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name to be displayed here. This name can be up to
12 characters long.
vrid - (Optional) Specifies the Virtual Router ID to be displayed.
<vrid 1-255> - Enter the Virtual Router ID to be displayed here. This value must be between 1
and 255.
If no parameter is specified, then all the VRRP entries will be displayed.
Restrictions
None.
Example
To display the VRRP configuration: