there are legacy stations using the same radio frequency.
auto - Specifies that the protection mechanism is set to the “automatic” mode. This is the
default option.
off - Specifies that the protection mechanism is set to the “off” mode.
default - Specifies that the default option will be used.
qos ap_edca - Specifies that the downstream traffic flowing from the access point to the client
station EDCA queues for Voice (0), Video (1), Best-effort (2), and Background (3) queues.
The user can configure the AIFS (Arbitration Inter-Frame Spacing), Minimum Contention
Window, Maximum Contention Window, and the Maximum Burst Duration for each of these
queues.
background - Specifies that the AIFS will be set as 7ms, the Minimum Contention Window
as 15ms, the Maximum Contention Window as 1023ms, and the Maximum Burst
Duration as 0μs.
best_effort - Specifies that the AIFS will be set as 3ms, the Minimum Contention Window
as 15ms, the Maximum Contention Window as 63msecs, and the Maximum Burst
Duration as 0μs.
video - Specifies that the AIFS will be set as 1ms, the Minimum Contention Window as
7ms, the Maximum Contention Window as 15ms, and the Maximum Burst Duration as
3000μs.
voice - Specifies that the AIFS will be set as 1ms, the Minimum Contention Window as
3ms, the Maximum Contention Window as 7ms, and the Maximum Burst Duration as
1500μs.
aifs - Specifies that the Arbitration Inter-Frame Spacing (AIFS) will be configured.
<int 1-255> - Enter the AIFS value used here. This value must be between 1 and 255.
default - Specifies that the default value will be used.
cwmax - Specifies to configure the Maximum Contention Window value in milliseconds.
1 - Specifies that the Maximum Contention Window value will be set as 1ms.
3 - Specifies that the Maximum Contention Window value will be set as 3ms.
7 - Specifies that the Maximum Contention Window value will be set as 7ms.
15 - Specifies that the Maximum Contention Window value will be set as 15ms.
31 - Specifies that the Maximum Contention Window value will be set as 31ms.
63 - Specifies that the Maximum Contention Window value will be set as 63ms.
127 - Specifies that the Maximum Contention Window value will be set as 127ms.
255 - Specifies that the Maximum Contention Window value will be set as 255ms.
511 - Specifies that the Maximum Contention Window value will be set as 511ms.
1023 - Specifies that the Maximum Contention Window value will be set as 1023ms.
default - Specifies that the default value will be used.
cwmin - Specifies to configure the Minimum Contention Window value in milliseconds.
1 - Specifies that the Minimum Contention Window value will be set as 1ms.
3 - Specifies that the Minimum Contention Window value will be set as 3ms.
7 - Specifies that the Minimum Contention Window value will be set as 7ms.
15 - Specifies that the Minimum Contention Window value will be set as 15ms.
31 - Specifies that the Minimum Contention Window value will be set as 31ms.
63 - Specifies that the Minimum Contention Window value will be set as 63ms.
127 - Specifies that the Minimum Contention Window value will be set as 127ms.
255 - Specifies that the Minimum Contention Window value will be set as 255ms.
511 - Specifies that the Minimum Contention Window value will be set as 511ms.
1023 - Specifies that the Minimum Contention Window value will be set as 1023ms.
default - Specifies that the default value will be used.
max_burst - Specifies to configure the Maximum Burst Duration value in microseconds.
(μs)
<int 0-999900> - Enter the Maximum Burst Duration value used here. This value must
be between 0 and 999900μs.
default - Specifies that the default value will be used.
station_edca - Specifies that the upstream traffic flowing from the client station to the access
point EDCA queues for voice (0), video (1), best-effort (2), and background (3) queues.
The user can configure the AIFS (Arbitration Inter-Frame Spacing), Minimum Contention
Window, Maximum Contention Window, and the Transmission Opportunity Limit for each
To Next Page
Loading...
