D-Link DWS-3160-24TC - Chapter 84 Wireless Client Association Command List

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
737
Chapter 84 Wireless Client Association
Command List
config wireless client disassociate [all | <macaddr> | ap <macaddr> | ssid <ssid> | vap
<macaddr>]
show wireless client
{[summary | <macaddr> {[client_qos {radius} | neighbor ap | statistics
{[association | session]} | dist_tunnel]}]}
show wireless ssid [<ssid> client | client]
show wireless switch client
show wireless vap {<macaddr>} client
84-1 config wireless client disassociate
Description
This command is used to initiate a request to disassociate a client, specified by the MAC address,
or all clients associated to a WS managed AP, a particular SSID, or a particular VAP. The Wireless
Switch sends a message to the appropriate managed AP to force the disassociation.
Format
config wireless client disassociate [all | <macaddr> | ap <macaddr> | ssid <ssid> | vap
<macaddr>]
Parameters
all - Specifies to disassociate all clients associated.
<macaddr> - Enter an associated client MAC address, to disassociate, here.
ap - Specifies to disassociate all the clients, associated with the WS Managed AP.
<macaddr>
- Enter the MAC address of the WS Managed AP here.
ssid - Specifies to disassociate all the clients, associated with a particular SSID.
<ssid> - Enter the SSID used here.
vap - Specifies to disassociate all the clients, associated with a particular VAP.
<macaddr> - Enter the MAC address of the VAP here.
Restrictions
Only Administrators can issue this command.
Example
To disassociate all associated clients:
DWS-3160-24PC:admin#config wireless client disassociate all
Command: config wireless client disassociate all
Are you sure you want to disassociate all clients in the system? (y/n) y
Disassociate requested for all clients in the system.
Success.
DWS-3160-24PC:admin#