DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
764
DWS-3160-24PC:admin#config wireless ap 00-22-B0-3C-DD-C0 debug enable
Command: config wireless ap 00-22-B0-3C-DD-C0 debug enable
Enter password (32 characters max):*****
Enter the new password again for confirmation:*****
Success.
DWS-3160-24PC:admin#
To configure the managed AP’s channel:
DWS-3160-24PC:admin#config wireless ap 00-22-B0-3C-DD-C0 radio 1 channel 36
Command: config wireless ap 00-22-B0-3C-DD-C0 radio 1 channel 36
Success.
To configure the managed AP’s power:
DWS-3160-24PC:admin#config wireless ap 00-22-B0-3C-DD-C0 radio 1 power 90
Command: config wireless ap 00-22-B0-3C-DD-C0 radio 1 power 90
Success.
DWS-3160-24PC:admin#
88-2 delete wireless ap_neighbors
Description
This command is used to delete entries from the managed AP client and AP neighbor lists.
NOTE: Client neighbor entries added via a client association to the managed AP will
not be cleared. These are only removed by the System when a client disassociates.
Format
delete wireless ap_neighbors
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To delete entries from the managed AP client and AP neighbor lists:
To Next Page
Loading...
