Command: show wireless ap_provisioning 00-22-B0-3C-43-C0
MAC address : 00-22-B0-3C-43-C0
AP IP Address : 192.168.69.125
Primary Switch IP : 192.168.69.123
Backup Switch IP : 192.168.69.124
Mutual Authentication Mode : Disabled
Unmanaged AP Re-provisioning Mode : Enabled
New Primary Switch IP : 0.0.0.0
New Backup Switch IP : 0.0.0.0
New Profile ID : 1 - Default
AP Provisioning Status : Not Started
AP Profile and Certificate Tx. Status : Not Started
Time Since Last Update : 0d:00:00:05
91-10 show wireless certificate_request
Description
This command is used to display the status of Switch certificate requests.
Format
show wireless certificate_request
Parameters
None.
Restrictions
None.
Example
To display the Switch’s certificate request status:
Command: show wireless certificate_request
Certificate Request Target IP Address : 192.168.69.123
Certificate Request Status : Success
91-11 show wireless switch_provisioning
Description
This command is used to display the Switch’s provisioning information.